Synthesis of novel tryptamine and β-carboline derivatives via palladium-catalyzed reaction of bromotryptamine with organic boronic acids

New tryptamine 5, 7 and β-carboline derivatives 3 were preparated by palladium-catalyzed coupling reaction of 5-bromotryptamine 1 with aryl boronic acids. Dedicated to Professor András Lipták on his 70^th birthday.     

Stability of Suspensions of Bioactive Particles Using Hybrid Organic–Inorganic Solutions as Dispersing Media

Functional coatings incorporating different types of particles developed by the sol–gel method have been proposed in the last few years for diverse applications. This work focuses on the preparation of homogeneous coatings prepared from stable suspensions with 10 wt% of glass and glass ceramic particles in a hybrid organic–inorganic solution as dispersing media. For this purpose, the pH was shifted up to 6–7 by adding tetrapropylammonium hydroxide (TPAH) which behaves as a cationic surfactant being probably adsorbed on the particles surface, while the sol maintains stable. Rheological measurements were performed to study the stability of the suspensions prepared at different conditions such as the kind and concentration of dispersant and the pH conditions. After sintering at 450^∘C/30 min, coatings around 2 μ m in thickness were obtained.     

Selective liquid adsorption and structural properties of montmorillonite and its hexadecylpyridinium derivatives

Summary An X-ray diffraction method was used to study the structures of montmorillonites, the surfaces of which were covered to a systematically increasing extent with hexadecylpyridinium (HDP) cations. It was found that, depending on the degree of cover of the surface, the HDP cations form a mono- or bimolecular layer in the interlayer space. A detailed investigation was made of the selective sorption of binary mixtures on montmorillonite and on HDP-montmorillonites with different surface coverages. The adsorption excess isotherms were determined, as were the adsorption capacities from analysis of the isotherms, and also the equivalent specific surface areas.It was established that from benzene-n-heptane mixtures the benzene is adsorbed only on the external surface of montmorillonite, while in the case of organocomplexes it causes moderate disaggregation.From benzene, alcohols with different numbers of carbon atoms are also preferentially adsorbed on the internal surfaces of montmorillonite; with the rise in the number of carbon atoms, the extent of interlamellar adsorption decreases. In the case of HDP-montmorillonites in methanol-benzene mixtures, the adsorption capacity exhibits a monotonous increase with the degree of organopbility in the range under consideration. In the event of optimum organophility the disaggregation of the organocomplex is complete, and the equivalent specific surface area is 764-778 m² · g^–1. The swelling of the organocomplex, which can be characterized by X-ray diffraction measurement, is in close correlation with the interlamellar liquid adsorption. The results show modification of the surface of montmorillonite with HDP cations fundamentally determines the nature and extent of the selective liquid adsorption.

---

Zusammenfassung Die Struktur von mit Hexadecyl-pyridinium(HDP)-Kationen im systematisch gesteigerten Maße bedeckten Montmorilloniten wurde mit der Röntgendiffraktions-Methode untersucht. Es wurde festgestellt, daß die HDP-Kationen, von der Bedeckung der Oberfläche abhängend, im Schichtzwischenraum eine mono- bzw. bimolekulare Schicht bilden. Die selektive Sorption binärer Gemische wurde an Montmorilloniten und an HDP-Montmorilloniten verschiedener Bedeckung eingehend untersucht. Es wurden die Adsorptionsisothermen von Flüssigkeitsgemischen und aus deren Analyse die Adsorptionskapazitäten und die äquivalenten spezifischen Oberflächen bestimmt.Es wurde festgestellt, daß aus Benzol-n-Heptan-Gemischen das Benzol nur an der äußeren Montmorillonite-Oberfläche adsorbiert wird, während es bei Organokomplexen eine mäßige Desaggregation verursacht. Die Adsorption von Alkoholen verschiedener Kohlenstoffzahl aus Benzol erscheint auch an inneren Montmorillonit-Oberflächen bevorzugt; mit zunehmender Kohlenstoffzahl nimmt das Ausmaß der interlamellaren Adsorption ab. Bei HDP-Montmorilloniten zeigt die Adsorptionskapazität aus Methanol-Benzol-Gemischen mit zunehmender Organophilität im untersuchten Gebiet eine monotone Steigerung. Im Falle optimaler Organophilität ist die Desaggregation vollständig, die äquivalente spezifische Oberfläche beträgt 764-778 m²/g. Die durch Röntgenn-diffraktionsmessung charakterisierbare Quellung des Organokomplexes steht mit der interlamellaren Flüssig-keitsadsorption in engern Zusammenhang. Unsere Ergebnisse zeigen, daß Charakter und Ausmaß der selektiven Flüssigkeitsadsorption durch die Modifizierung der Montmorillonit-Oberfläche mit HDP-Kationen grundlegend verändert wird.

---

---

With 14 figures and 4 tables     

Characterization of three agave species by gas chromatography and solid-phase microextraction-gas chromatography-mass spectrometry

Steam distillation (SD) extraction-solid-phase microextraction coupled to GC-MS was developed for the determination of terpenes and Bligh-Dyer extraction-derivatization coupled with GC for the determination of fatty acids such as ethyl esters were used. It was found that the three different Agave species have the same profile of fatty acids; the quantity of these compounds is different in each Agave variety. On the other hand, different terpenes were identified in the three Agave plants studied: nine in A. salmiana, eight in A. angustifolia and 32 in A. tequilana Weber var. azul.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

Ca(2.5)Sr(0.5)GaMn2O8: diamagnetic Ga in control of the structural and electronic properties of a bilayered manganate

The temperature dependence of the crystal structure and electronic properties of brownmillerite-like Ca(2.5)Sr(0.5)GaMn(2)O(8) has been studied by neutron powder diffraction and muSR spectroscopy. The results show that short-range 2D magnetic order begins to develop within the perovskite-like bilayers of MnO(6) octahedra approximately 50 K above the 3D Néel temperature of approximately 150 K. The bilayers show a structural response to the onset of magnetism throughout this temperature range whereas the GaO(4) layers that separate the bilayers only respond below the 3D ordering temperature. XANES spectroscopy shows that the sample contains Mn(3+) and Mn(4+) cations in a 1:1 ratio, and the behavior in the region of the Néel transition is interpreted as a local charge ordering. Electron diffraction and high-resolution electron microscopy have been used to show that the local microstructure is more complex than the average structure revealed by neutron diffraction, and that microdomains exist in which the GaO(4) tetrahedra show different orientations. It is argued that the bonding requirements of diamagnetic gallium control the electronic behavior within the perovskite-like bilayers.     

Enthalpies of formation of methoxybenzoic acids and their dependence on structure

The energy of combustion of 2,5-dimethoxybenzoic acid has been determined using a static bomb calorimeter. The vapor pressures of the compound have been measured over a 18 K temperature interval by the Knudsen effusion technique. Heat capacity measurements betweenT=270 K andT=338 K were carried out by DSC. From these experimental results the standard molar enthalpies of combustion, sublimation, and formation in the crystalline and gaseous state at the temperature 298.15 K have been derived. With this compound, the series of mono- and dimethoxy-benzoic acids have been completed. Their_f H _m ^o values were expressed by an additive relationship, taking into account the number of methoxy groups and the number of all 1,2 interactions: an accuracy of 3.3 kJ·mol^–1 was achieved. In an alternative approach the substituent effect of the methoxy groups was evaluated within the framework of isodesmic reactions. The effect of disubstitution was referred to mono derivatives and the excess energy—the so-called buttressing effect—was evaluated (2–24 kJ· mol^–1 for individual bis derivatives). These values were explained in terms of the conformation of the methoxy group around the C_ar-O bond.     

Cure kinetics of epoxy resin and thermoplastic polymer

The cure kinetics and morphology of diglycidyl ether of bisphenol A (DGEBA) modified with polyvinyl acetate (PVAc) using diaminodiphenylmethane (DDM) as hardener were investigated through differential scanning calorimetry (DSC) and environmental scanning electron microscopy (ESEM). Isothermal curing measurements were carried out at 150, 120 and 80°C. The kinetic parameters were obtained using the general autocatalytic chemically controlled model. The comparison of the kinetic data indicates that the presence of PVAc does not change the autocatalytic nature of the cure reaction. Two T _g’s were observed in the fully cured samples of the modified systems. ESEM micrographies confirm the biphasic morphology.     

TTT Cure Diagram

Curing reactions of the epoxy system consisting of a diglycidyl ether of bisphenol A (BADGE n=0) and m-xylylenediamine (m-XDA) were studied to calculate time-temperature-transformation (TTT) isothermal cure diagram for this system. Gel times were measured as a function of temperature using solubility test. Differential scanning calorimetry (DSC) was used to calculate the vitrification times. DSC data show a one-to-one relationship between T _g and fractional conversion, a independent of cure temperature. As a consequence, T _g can be used as a measure of conversion. The activation energy for the polymerization overall reaction was calculated from the gel times obtained using the solubility test (41.5 kJ mol^-1). This value is similar to the results obtained for other similar epoxy systems. Isoconversion contours were calculated by numerical integration of the best fitting kinetic model. This revised version was published online in July 2006 with corrections to the Cover Date.     

Crystallization kinetic studies: A means to evaluate time-temperature-transformation curves. Application to metallic glasses

It is shown that the study of the kinetics of crystallization of an amorphous alloy may be used to obtain the correct form of the low temperature part of the time-temperature-transformation (T-T-T) curves. A unified review of the current kinetics of crystallization studies is presented and the general kinetic equation which gives the reaction rate as a function of temperature and crystalline fraction is shown to contain information related to theT-T-T-curves. Finally examples of application to two metallic glasses, Nd₃Fe₇₇B₂₀ and Fe_67.5Co₁₅Nb_1.5B₁₆, obtained by rapid solidification techniques are presented. The comparison between theory and experiment is satisfactory.

---

Zusammenfassung Es wird gezeigt, daß die Untersuchung der Kristallisationskinetik von amorphen Legierungen genutzt werden kann, die korrekte Form des Niedertemperaturbereiches der Zeit-Temperatur-Transformation (T-T-T) Kurven zu erhalten. Es wird ein einheitlicher Überblick über die jüngsten Untersuchungen von Kristallisationskinetiken gegeben und an der allgemeinen Gleichung der Reaktionsgeschwindigkeit als eine Funktion von Temperatur und Kristallanteil wird gezeigt, daß sie Informationen bezüglich der T-T-T-Kurven beinhaltet. Letztlich wird eine Anwendung an zwei, durch schnelles Erstarren gewonnenen metallischen Gläsern Nd₃Fe₇₇B₂₀ und Fe_67.5Co₁₅Nb_1.5B₁₆ dargelegt. Zwischen Theorie und Praxis konnte eine ausreichende Übereinstimmung festgestellt werden.

---

---

Dedicated to Professor Dr. H. J. Seifert on the occasion of his 60^th birthday

---

This work was supported by the Comision Interdepartamental de Cienca y Tecnologia, CICYT (project No. MAT88-0439) which are acknowledged.